Other/Misc
Customize Camera Labels on Decimator Multiviewer
Download the latest Decimator Control Panel software at https://decimator.com/DOWNLOADS/DOWNLOADS.html Once you've connected to your Decimator multiviewer (via USB A --> USB B mini) within the Control Panel software, click on the UMDs tab. In this ...
Customize Camera Labels in Blackmagic MultiView
Download Multiview software here: https://www.blackmagicdesign.com/support/family/multiview-monitoring CUSTOMIZING INPUT LABELS Labeling your sources lets you quickly identify each source within the multi view layout. You can also save and load label ...
Lilliput Monitors - How to configure settings
The Lilliput monitors come with built in scope and waveforms, but they need to be configured along with other settings. The following is a list of all settings they should be configured to: Press the Menu button to bring up the monitor OSD. Go into ...
Web Relays - Changing IP Address
If you need to change or program an IP address on a web relay, you'll need to access it's web GUI by typing in "http:\\192.168.1.xxx\setup.html". The default user name and password is admin / webrelay. After changing the IP address, the web relay ...
Guide - 8K Camera Mount for Lifts
The following guide provides step by step instructions on how to use the 8K camera mounting system to mount the structure onto a standard lift: MOUNTING CAMERA 1) Extend the mount to the closest possible setting to grip the lift railings, refer to ...
Clock Embed (PiP) - Configuring Microtronix
Here are the instructions for connecting to the Microtronix DX-2200 device from your PC and programming the toggle switch to have it function as a PiP ON/OFF switch. First download and install PuTTY at https://www.putty.org/ Connect your PC to the ...
Rebooting AMX Touchpanel
Use the stylus and press and hold the Reset button until the unit reboots and connects to the master controller.