Web Relays - Changing IP Address
If you need to change or program an IP address on a web relay, you'll need to access it's web GUI by typing in "http:\\192.168.1.xxx\setup.html". The default user name and password is admin / webrelay.
After changing the IP address, the web relay needs to be physically power cycled for it to take effect.
Related Articles
Bolin Controller - Configure IP addresses for cameras and controller
Press setup button, password 0000 Arrow on camera setting, press PT speed button Ensure the top line reads “CAM001”, if not set to CAM001 (Whatever camera # you are configuring to the controller) Arrow on protocol, using zoom speed knob scroll to ...
Lyvve Coach II - Tech Support Info
Service web site: https://insaneimpact.com/owners-portal/support/ Youtube channel with videos: https://www.youtube.com/@InsaneImpactService Tech Support Phone Number (515) 349-7708 Tech Support Email service@insaneimpact.com
HR-140 Heater and Defroster Setup on RP-150 Controller
The outdoor Panasonic HR-140 cameras contain a heater and defroster feature that can be activated from the RP-150 controller. But you'll need to configure a User button for these features: Select function menu, button to the right of the touchscreen: ...
JVC - Configuring Iris and Focus Settings
The Iris and Focus settings allow you to tweak brightness settings: 1. For changing gain, shutter, and iris settings, tap the [EXPOSURE] button. 2. If you have [USER1] currently assigned as “Exposure”, press the physical USER1 button on the ...
JVC LP100 Controller
Front Panel 1. USER1 button – For switching the settings menu. 2. F1 knob – Used for the multi-function settings. 3. F2 knob – Used for the multi-function settings. 4. USER2 button – For switching the settings menu. 5. Zoom lever – For performing the ...