Bolin Cameras
Bolin SD530-NX and T-1010 Controllers - Wiper Not Working
If you are using a Bolin SD530-NX camera with an older Bolin T-1010 controller, the typical "Wiper On" and "Wiper Off" functions does not work. The 530-NX cameras use the "Cont Wiper ON/OFF" commands that the older T-1010 controllers do not have. The ...
Bolin SD530-NX and T-1020 Controllers - Wiper Not Working
If you are using a Bolin SD530-NX camera with a newer Bolin T-1020 controller, the typical "Wiper On" and "Wiper Off" functions no longer work. Instead you'll need to use the "Cont Wiper On" and "Cont Wiper Off" functions instead
Bolin SD530-NX and T-1020 Controllers - Using Advanced Presets
The newer Bolin T-1020 controllers have a "Preset Mode" that is defaulted to "Easy". This mode means that when you are trying to type in the preset number you want to call for your camera, it will only register the first number you type and then ...
Bolin Camera Voltage Ranges
The following is a list of the Bolin cameras provided by 8K and what the acceptable voltage ranges are for each: EXU248F EX ULTRA (24VDC/60 WATT) 530 SPEED DOME (24VDC/48 WATT)
Multi-Camera Stadium Shooting Guide (For Bolin Cameras)
Here is a link for the full Multi-Camera Stadium Shooting Guide: Multi-Camera Stadium Shooting Guide (Bolin)
Camera Shooting Quick Guide (For Bolin Cameras)
Below is a PDF file for a Bolin Camera Quick Guide
Bolin Controller - Configure IP addresses for cameras and controller
Press setup button, password 0000 Arrow on camera setting, press PT speed button Ensure the top line reads “CAM001”, if not set to CAM001 (Whatever camera # you are configuring to the controller) Arrow on protocol, using zoom speed knob scroll to ...
Bolin - How to configure F1 - F6 Buttons
Press setup button, password 0000 Arrow on keyboard setting, press PT speed button Arrow down to the “Assigned Key: F1” option and twist the Zoom speed knob to change this to the button you want to configure. For example, let's suppose we want to ...
Bolin - Creating Presets for Manual Camera Settings