Bolin SD530-NX and T-1020 Controllers - Wiper Not Working

• Related Articles

• Bolin SD530-NX and T-1010 Controllers - Wiper Not Working

  If you are using a Bolin SD530-NX camera with an older Bolin T-1010 controller, the typical "Wiper On" and "Wiper Off" functions does not work. The 530-NX cameras use the "Cont Wiper ON/OFF" commands that the older T-1010 controllers do not have. The ...

• Bolin SD530-NX and T-1020 Controllers - Using Advanced Presets

  The newer Bolin T-1020 controllers have a "Preset Mode" that is defaulted to "Easy". This mode means that when you are trying to type in the preset number you want to call for your camera, it will only register the first number you type and then ...

• Camera Shooting Quick Guide (For Bolin Cameras)

  Below is a PDF file for a Bolin Camera Quick Guide

• RP-150 Controller - Turn on Wiper on Outdoor Camera

  Most of the Panasonic 140 Camera and RP-150 Controller combos are pre-programmed so that the User 6 button activates the wiper on the camera. But if that is not working, you can manually activate the wiper: 1) Press the Function button on the ...

• Bolin - How to configure F1 - F6 Buttons

  Press setup button, password 0000 Arrow on keyboard setting, press PT speed button Arrow down to the “Assigned Key: F1” option and twist the Zoom speed knob to change this to the button you want to configure. For example, let's suppose we want to ...