WTW - Re-Engage "Warp" if the WTW screen is not blended correctly

Right click on the desktop background and highlight Scalable Desktop, followed by clicking on the “Engage” submenu:

• Related Articles

• WTW - Re-blending Projector Walk Thru Walls (2, 3, or 4 Projector Configuration)

  The following steps explains how to re-blending your projector-based Walk Thru Wall. This is NOT intended for a brand new 1st configuration/installation. Setting Up Mosaic Configuration 1) First, you will need to right click on the desktop ...

• WTW - Correct Boot Up and Shut Down Procedure (For Projector WTW)

  If your Walk Thru Wall contains projectors, the following checklist below describe the "Best practice" for booting up and shutting down the Walk Thru Wall: BOOT UP Power on all projectors first. Now power on the Walk Thru Wall server. The reason we ...

• WTW - Unable to change video sources or inputs on the Streamdeck

  If you are trying to change your sources or inputs on the Streamdeck, but the walk through wall doesn't seem to update, you probably have multiple instances of the 8K Viewer running simultaneously. Close out all instances of 8K Viewer on the walk ...

• Atomos - Pixelated Video

  If you are seeing pixelated video from recorded clips (Not live), there are a couple of settings to adjust that should resolve this: From the Atomos, tap on the "H.264 HQ" menu item on top of the screen. This should bring up a pop up menu. On the ...

• Atomos - How to configure the Atomos recorder

  When setting up a new Atomos, here are the settings that the recorder needs to be configured: On the top of the Atomos screen, tap on the "H.264 HQ" item. This will bring up a large pop up menu where all the settings live. You should be on the ...