mastRcam (During Practice) - Using Color Bars on UMR-20 Recorder

mastRcam (During Practice) - Using Color Bars on UMR-20 Recorder

To display color bars on your display, you’ll use the Panasonic UMR-20. Simply press the [User 1] button on the recorder and it will show color bars on the recorder’s display as well as the monitor.

If this does not work, you can assign the User 1 button to display color bars by:
1. Press the [Menu] button on the UMR-20
2. Select “User SW” from the menu
3. Select “User 1”
4. Assign this button to “Bars”

    • Related Articles

    • mastRcam SC (During Practice) - Using Color Bars on UMR-20 Recorder

      To display color bars on your display, you’ll use the Panasonic UMR-20. Simply press the [User 1] button on the recorder and it will show color bars on the recorder’s display as well as the monitor. If this does not work, you can assign the User 1 ...

    • mastRcam (Before Practice) - Systems Check / Functionality

      Before raising the mast, we want to make sure functionally all the equipment is working. 1. Turn on power – Turn the red power knob on the console dashboard to the ON position. The inverter controller should turn on immediately where the cameras, ...

    • mastRcam (During Practice) - Recording Clips on UMR-20

      Once practice is in full swing and you’ve got your picture set up, the final step is to record clips. You’ll need an SD card inserted into the side of the UMR-20 as that is where all your video clips will be stored. When you are ready to mark clips, ...

    • mastRcam - TruVu Monitor Color Calibration

      The following steps detail how to perform a basic color calibrations on TruVu monitors. It’s important to note that every customer site will not be exactly the same and definitely not with the same lighting, so the following steps are more of a basic ...

    • mastRcam Operations Checklist - End of Practice

      Below is a checklist that covers all the basics of using the mastRcam at the end of practice which includes breaking down all the components, preparing the trailer for storage, and charging the mastRcam. Lower Mast Remove Camera Housings or Put on ...