Unable to change video sources or inputs on the Streamdeck
If you are trying to change your sources or inputs on the Streamdeck, but the walk through wall doesn't seem to update, you probably have multiple instances of the 8K Viewer running simultaneously.
Close out all instances of 8K Viewer on the walk through wall server and then relaunch.
Related Articles
Replay (Teradek) - Change Video Output Bit Rate
Close all open Chrome windows. Press the "Windows Key" and the taskbar will come up. Right click on the Chrome windows to close. If two Chrome windows are open you will need to repeat this step for the second window. Press the "Windows Key" and ...
Lyvve Coach - Change Brightness
For outdoor usage, you’ll typically want to have the board’s brightness at 100%. For indoor usage, you may want to reduce brightness between 30%-60%. To change the brightness, you’ll do this directly on the NovaStar LED processor by: 1. Press the ...
LED Wall - Incorrect Resolution with HDMI video source showing on LED Wall
If you are seeing video that's too small on the LED Board even though you have the Streamdeck set to 100% (or full size), AND your video source is HDMI, then the issue is probably an EDID problem. If you are using an HDMI splitter, this is a common ...
Invalid SDI Video or No Video Source (HD-100)
Typically if video is lost on the mastRcam camera system there are 2 types of errors you'll see on the monitor or UMR-20: NO VIDEO SOURCE AVAILABLE This error is typically a problem with the camera's signal and not the HD-100. You'll notice on the ...
Invalid SDI Video or No Video Source (HD-100)
Typically if video is lost on the mastRcam camera system there are 2 types of errors you'll see on the monitor or UMR-20: NO VIDEO SOURCE AVAILABLE This error is typically a problem with the camera's signal and not the HD-100. You'll notice on the ...