Calibrating Telestrator (CPN-5600)

Calibrating Telestrator (CPN-5600)


  1. Plug in a keyboard to the Pointmaker.
  2. Activate the Main Menu by pressing the "Print Screen" button on the keyboard.
  3. From the Main Menu, tap DEVICES.
  4. Select CALIBRATION.
  5. Select TOUCH SCREEN CALIBRATION and simply follow the instructions on the screen.

    • Related Articles

    • Planar Locks Up

      This issue is with the Planar set to Auto Mode.  Issue is resolved where the Planar must be set to HDMI input and taken out of Auto. When there is only one cable connected to the Planar Touch Monitor, always set the Planar to that input so that it ...