RP-150 Controller - Using Presets

RP-150 Controller - Using Presets

To store Presets from your RP-150 Controller:

1) Press the PMEM/TMEM button on the controller

2) On the touchscreen, you'll see a list of preset buttons. To store a preset, first set your camera to a view that you want to save as a preset (For example, maybe you want to zoom in on the center field logo as a preset)
3) To store this preset, you will need to press and hold the F1 knob and then tap the touchscreen on the Preset # you want to save.
4) To call this preset, simply just tap on the Preset # and the camera will move to where you had saved your preset.
5) If you want to delete a saved Preset, press and hold to F4 knob and then tap the touchscreen on the Preset # you want to delete.

For more information, here's a video that explains how to use presets: https://vimeo.com/499609598

    • Related Articles

    • RP-120 Controller - Factory Reset

      It's possible for the RP-120 controller to lose its settings especially when it's being connected/disconnected every day. If the controller no longer will control any camera it's connected to, do the following: 1) On the controller, press the "49" ...

    • RP-120 Controller is "Locked"

      1) Press the MENU button 2) Press button 25. RP SETUP 3) Use the F1 knob to select "4. ENABLE BUTTON" 4) Make sure the option is selected for "ACTIVE", otherwise use the F2 knob to change it. 5) Now use the F1 knob to select "5. MENU CONTROL". 6) ...

    • How to Setup/Execute Baseline Picture (RP-150 Controllers)

      The following document will explain how to get your camera to a baseline picture and then create a preset that will allow a user to return to that baseline in the event that a camera’s picture has been altered and cannot be remedied quickly: CREATE A ...

    • RP-150 Controller - Turn on Wiper on Outdoor Camera

      Most of the Panasonic 140 Camera and RP-150 Controller combos are pre-programmed so that the User 6 button activates the wiper on the camera. But if that is not working, you can manually activate the wiper: 1) Press the Function button on the ...

    • RP-150 Controller - Remote Power On/Off Your Camera

      If you ever need to reboot your camera, but don't want to leave your controller station, you can use your RP-150 controller to remotely power on or off your camera: 1) On your controller, press and hold the appropriate Camera Select button. Most ...