RP-150 Controller - Turn on Wiper on 140 Camera

RP-150 Controller - Turn on Wiper on 140 Camera

Most of the Panasonic 140 Camera and RP-150 Controller combos are pre-programmed so that the User 6 button activates the wiper on the camera.

But if that is not working, you can manually activate the wiper:

1) Press the Function button on the controller
2) On the touchscreen, tap the "Housing Info" menu.

3) Tap on Row 1
4) To change the Wiper setting, use the F4 knob on the controller to change the Wiper setting to Slow or Fast. Press the F4 knob to save the action. This will now activate the wiper. Use the F4 knob to turn the wiper OFF when you are done.

    • Related Articles

    • RP-120 Controller - Unable to control camera

      1) First power cycle both the camera and controller 2) If that doesn't fix the issue, press button 36 CTRL TYPE and make sure CAM 1 is set to "Serial" 3) Also make sure that the 422 cable connecting into the controller is in Port 1 (But not the LAN ...

    • RP-120 Controller - Factory Reset

      It's possible for the RP-120 controller to lose its settings especially when it's being connected/disconnected every day. If the controller no longer will control any camera it's connected to, do the following: 1) On the controller, press the "49" ...

    • RP-150 Controller - Using Presets

      To store Presets from your RP-150 Controller: 1) Press the PMEM/TMEM button on the controller 2) On the touchscreen, you'll see a list of preset buttons. To store a preset, first set your camera to a view that you want to save as a preset (For ...

    • RP-150 Controller - Remote Power On/Off Your Camera

      If you ever need to reboot your camera, but don't want to leave your controller station, you can use your RP-150 controller to remotely power on or off your camera: 1) On your controller, press and hold the appropriate Camera Select button. Most ...

    • RP-150 Controller - Adjust or Reverse Direction of Tilt

      Some users like to have the Tilt or Y-axis direction reversed so that when the joystick is moved down, the picture actually tilts upward. Here's how you can change the direction of the Tilt: 1) First, press the Function button on the RP-150 ...