RP-150 Controller - Disable/Enable Joystick Rocker Zoom
If you want to disable or enable the rocker switch on the joystick for Zoom In/Out, here's how:
1) On the main menu on the touch screen of the controller, there is a Rocker section on the bottom right corner.
2) Tap the MODE button to enable or disable the rocker. Note that this only affects the rocker switch on the actual joystick.
Related Articles
RP-150 Controller - Adjust or Reverse Direction of Tilt
Some users like to have the Tilt or Y-axis direction reversed so that when the joystick is moved down, the picture actually tilts upward. Here's how you can change the direction of the Tilt: 1) First, press the Function button on the RP-150 ...RP-150 Controller - Using Presets
To store Presets from your RP-150 Controller: 1) Press the PMEM/TMEM button on the controller 2) On the touchscreen, you'll see a list of preset buttons. To store a preset, first set your camera to a view that you want to save as a preset (For ...RP-120 Controller - Factory Reset
It's possible for the RP-120 controller to lose its settings especially when it's being connected/disconnected every day. If the controller no longer will control any camera it's connected to, do the following: 1) On the controller, press the "49" ...RP-150 Controller - Turn on Wiper on 140 Camera
Most of the Panasonic 140 Camera and RP-150 Controller combos are pre-programmed so that the User 6 button activates the wiper on the camera. But if that is not working, you can manually activate the wiper: 1) Press the Function button on the ...RP-150 Controller - Remote Power On/Off Your Camera
If you ever need to reboot your camera, but don't want to leave your controller station, you can use your RP-150 controller to remotely power on or off your camera: 1) On your controller, press and hold the appropriate Camera Select button. Most ...