Replay - This Video File Cannot be Played. Error Code 224003

Replay - This Video File Cannot be Played. Error Code 224003

If you are trying to remotely view video clips from the 8K Replay system on an iPad, tablet, phone, etc and are getting a browser error 224003 that it cannot play the video file, the issue is likely to be that Windows Firewall is running on the Replay computer and preventing external devices from accessing the video files:

1) On the Replay computer, press the Windows key to bring up the Start menu. Alternately, you can press F11 to take the Replay application out of full screen so you can minimize it and get to the Windows desktop.
2) Go to the Windows Control Panel by searching for it on the Windows Start Menu
3) Select "System and Security"
4) Select "Windows Firewall"
5) Select "Turn Windows Firewall On or Off"
6) Select the bubble next to "Turn off Windows Firewall (not recommended)" and then select OK

    • Related Articles

    • Replay - Running out of Disk Space

      If you run into an error message on Replay that says you are running low on disk space, you may need to delete some older clips or video that are saved on the hard drive: Minimize 8K Replay, and go into your C: Drive. Click into the SmartFieldVideo ...

    • 8K Replay - Losing Frames or Artifacted Video

      This is an issue that may be more common with multi-stream Replay systems, but if a customer has a single-stream system but has multiple camera feeds going to a video switcher and then to Replay, this issue could pop up. The primary issue is that 8K ...

    • Lyvve Coach - Connecting 8K Replay

      To connect the 8K Replay case to the Lyvve Coach’s Connection Panel, the basic flow is to have a video source (Camera, mastRcam, etc) connected to the 8K Replay case, then connect the 8K Replay Case to the Lyvve Coach. Below is a diagram showing the ...

    • Replay (Teradek) - Change Video Output Bit Rate

      Close all open Chrome windows. Press the "Windows Key" and the taskbar will come up. Right click on the Chrome windows to close. If two Chrome windows are open you will need to repeat this step for the second window. Press the "Windows Key" and ...

    • Invalid SDI Video or No Video Source (HD-100)

      Typically if video is lost on the mastRcam camera system there are 2 types of errors you'll see on the monitor or UMR-20: NO VIDEO SOURCE AVAILABLE This error is typically a problem with the camera's signal and not the HD-100. You'll notice on the ...