RCT - Updating Firmware Instructions

RCT - Updating Firmware Instructions

Installation instructions:

  1. Download the latest firmware folder from RCT's website
  2. Once downloaded, open that folder, an inside that folder will be two additional folders: AutoCopy and AutoRun
  3. Copy both folders to a USB drive
  4. Plug the USB drive into the RCT USB port on the top of the unit next to the ethernet cable and follow the onscreen instructions.
  5. Click OK to update the firmware
  6. Remove the USB drive according to the onscreen instructions

    • Related Articles

    • RCT - Maximum Pan Speed Exceeded

      If you see this error message appear on the monitor, this means that you are moving the RCT controller too fast. One thing that you can do is adjust the MotionAmp Settings: 1) On the main page, tap on the [CAMERA SETTINGS] button. 2) In the MotionAmp ...

    • NovaLCT Backdoor Admin Menu

      In the case where you have some receiving cards on different firmware versions than others, you can update firmware through the NovaLCT secret menu. With NovaLCT open, type 666888 to access that menu

    • Calibrating Telestrator (CPN-5600)

      Plug in a keyboard to the Pointmaker. Activate the Main Menu by pressing the "Print Screen" button on the keyboard. From the Main Menu, tap DEVICES. Select CALIBRATION. Select TOUCH SCREEN CALIBRATION and simply follow the instructions on the screen.

    • UE-150 Camera - Fixing "Sluggish" Camera Control

      ** AS OF DECEMBER 2020 - There is new firmware from Panasonic that fixes this issue. The steps below can be considered a temp fix until firmware can be updated 1. From your 150 Controller, press the MAINTENANCE button located on the right side of the ...

    • mastRcam SC - Gray bars appearing in video (HD-100)

      This is a normal function with the stabilizer (HD-100) trying to stabilize the video while the camera is moving. However, if you want to turn the stabilizer OFF, then here are instructions on turning it off (depending on what version controller you ...