RCT - Maximum Pan Speed Exceeded
If you see this error message appear on the monitor, this means that you are moving the RCT controller too fast.
One thing that you can do is adjust the MotionAmp Settings:
1) On the main page, tap on the [CAMERA SETTINGS] button.
2) In the MotionAmp menu, increase the PAN and/or TILT options closer to 1.0, and you’ll have the ability to
pan/tilt the camera faster without having to move the RCT as much as what’s in
that video. That may help with the camera responding to a max pan speed
exceeded error. Finding the right MotionAmp settings is a balance
between your preference for how much you want to physically move the RCT pan
bars vs how smooth the camera will pan and tilt.
Related Articles
RCT - Updating Firmware Instructions
Installation instructions: Download the latest firmware folder from RCT's website Once downloaded, open that folder, an inside that folder will be two additional folders: AutoCopy and AutoRun Copy both folders to a USB drive Plug the USB drive into ...JVC - Configuring Pan/Tilt/Zoom
On the JVC cameras, there’s a way to adjust the speed of which the controller will pan, tilt, and zoom. 1. Tap the [LIVE] button. 2. Now use the physical F2 knob on the controller to adjust the SPEED. Values are 1-8, where 1 is the slowest speed ...UE-150 Camera - Fixing "Sluggish" Camera Control
** AS OF DECEMBER 2020 - There is new firmware from Panasonic that fixes this issue. The steps below can be considered a temp fix until firmware can be updated 1. From your 150 Controller, press the MAINTENANCE button located on the right side of the ...JVC Controller Touchscreen
1. [USER1] – The function assigned to the [USER1] button can be configured. The default function assigned is “EXPOSURE”. 2. [F1] – The function assigned to the [F1] knob can be configured. The default function assigned is “AE LEVEL”. 3. [F2] – The ...Bolin Controller - Configure IP addresses for cameras and controller
Press setup button, password 0000 Arrow on camera setting, press PT speed button Ensure the top line reads “CAM001”, if not set to CAM001 (Whatever camera # you are configuring to the controller) Arrow on protocol, using zoom speed knob scroll to ...