Panasonic RP-150 - Unable to control more than 5 cameras

This is an issue where there is a setting called "5 LIMITS" on the controller that needs to be DISABLED.

Push the System button on the RP150
The System menu will appear on the touchscreen
Touch the 5 RP IP Set button on the touchscreen - top right corner
On row 4, you should see the 5LIMITS setting
Touch row 4, then use the 2^nd dial from the left to change the 5LIMITS setting to DISABLE

Related Articles
Camera Shooting Quick Guide (For Panasonic Cameras)
Below is a PDF file for a Panasonic Camera Quick Guide
Multi-Camera Stadium Shooting Guide (For Panasonic Cameras)
Here is a link for the full Multi-Camera Stadium Shooting Guide: Multi-Camera Stadium Shooting Guide (Panasonic)
Panasonic Camera Voltage Ranges
The following is a list of the Panasonic cameras provided by 8K and what the acceptable voltage ranges are for each: PANASONIC UR-100 (12V-21.8VDC/3.1A-5.5A) PANASONIC UE-100 (10.8V-13.2VDC/3A) PANASONIC UE-150 (10.8V-13.2VDC/4A) PANASONIC AW-130 ...
RP-120 Controller - Unable to control camera
1) First power cycle both the camera and controller 2) If that doesn't fix the issue, press button 36 CTRL TYPE and make sure CAM 1 is set to "Serial" 3) Also make sure that the 422 cable connecting into the controller is in Port 1 (But not the LAN ...
HR-140 Heater and Defroster Setup on RP-150 Controller
The outdoor Panasonic HR-140 cameras contain a heater and defroster feature that can be activated from the RP-150 controller. But you'll need to configure a User button for these features: Select function menu, button to the right of the touchscreen: ...

Related Articles