NovaLCT Backdoor Admin Menu

• Related Articles

• Web Relays - Changing IP Address

  If you need to change or program an IP address on a web relay, you'll need to access it's web GUI by typing in "http:\\192.168.1.xxx\setup.html". The default user name and password is admin / webrelay. After changing the IP address, the web relay ...

• Replay (Teradek) - Change Video Output Bit Rate

  Close all open Chrome windows. Press the "Windows Key" and the taskbar will come up. Right click on the Chrome windows to close. If two Chrome windows are open you will need to repeat this step for the second window. Press the "Windows Key" and ...

• Calibrating Telestrator (CPN-5600)

  Plug in a keyboard to the Pointmaker. Activate the Main Menu by pressing the "Print Screen" button on the keyboard. From the Main Menu, tap DEVICES. Select CALIBRATION. Select TOUCH SCREEN CALIBRATION and simply follow the instructions on the screen.

• Lyvve Coach - Change Brightness

  For outdoor usage, you’ll typically want to have the board’s brightness at 100%. For indoor usage, you may want to reduce brightness between 30%-60%. To change the brightness, you’ll do this directly on the NovaStar LED processor by: 1. Press the ...

• UE-150 Camera - Fixing "Sluggish" Camera Control

  ** AS OF DECEMBER 2020 - There is new firmware from Panasonic that fixes this issue. The steps below can be considered a temp fix until firmware can be updated 1. From your 150 Controller, press the MAINTENANCE button located on the right side of the ...