(OLD) mastRcam - Issues with freezing video on HD-100

This is an issue where the power conditioner is causing voltage fluctuation issues that the HD-100 cannot handle and causes the video to freeze. A quick fix is to barrel around the HD-100, but a more permanent solution is:

• Related Articles

• mastRcam - Gray bars appearing in video (HD-100)

  This is a normal function with the stabilizer (HD-100) trying to stabilize the video while the camera is moving. However, if you want to turn the stabilizer OFF, then here are instructions on turning it off (depending on what version controller you ...

• Invalid SDI Video or No Video Source (HD-100)

  Typically if video is lost on the mastRcam camera system there are 2 types of errors you'll see on the monitor or UMR-20: NO VIDEO SOURCE AVAILABLE This error is typically a problem with the camera's signal and not the HD-100. You'll notice on the ...

• Invalid SDI Video or No Video Source (HD-100)

  Typically if video is lost on the mastRcam camera system there are 2 types of errors you'll see on the monitor or UMR-20: NO VIDEO SOURCE AVAILABLE This error is typically a problem with the camera's signal and not the HD-100. You'll notice on the ...

• mastRcam SC - Gray bars appearing in video (HD-100)

  This is a normal function with the stabilizer (HD-100) trying to stabilize the video while the camera is moving. However, if you want to turn the stabilizer OFF, then here are instructions on turning it off (depending on what version controller you ...

• mastRcam Hardware Components

  The following graphics show the various hardware components of the mastRcam Mobile trailer: MASTRCAM TRAILER USER CONSOLE (DASHBOARD) The image below shows the Dashboard of a dual camera mastRcam with 2 monitors, 2 UMR-20 recorders, and dual tilt ...