mastRcam SC (End of Practice) - Turn Off Power

Turn the red power knob on the console dashboard to the OFF position. The inverter controller (purple box next to the red power knob) will stay on, so you need to press and hold the power button on the controller for a couple of seconds and it will turn off after you release the button. Note that the inverter controller will stay ON if the mastRcam SC is plugged into shore power and charging. 

• Related Articles

• mastRcam (End of Practice) - Turn Off Power

  Turn the red power knob on the console dashboard to the OFF position. The inverter controller (purple box next to the red power knob) will stay on, so you need to press and hold the power button on the controller for a couple of seconds and it will ...

• mastRcam SC Operations Checklist - End of Practice

  Below is a checklist that covers all the basics of using the mastRcam SC at the end of practice which includes breaking down all the components, preparing the trailer for storage, and charging the mastRcam SC. Lower Mast Remove Camera Housings or Put ...

• mastRcam Operations Checklist - End of Practice

  Below is a checklist that covers all the basics of using the mastRcam at the end of practice which includes breaking down all the components, preparing the trailer for storage, and charging the mastRcam. Lower Mast Remove Camera Housings or Put on ...

• mastRcam SC (End of Practice) - Charge mastRcam

  The batteries of the mastRcam SC can typically go two practices between charging, but there’s no harm in charging the mastRcam SC after every practice. If the volt meter on the Console Dashboard reads 11.6 volts or less, then the mastRcam SC will ...

• mastRcam (End of Practice) - Charge mastRcam

  The batteries of the mastRcam can typically go two practices between charging, but there’s no harm in charging the mastRcam after every practice. If the volt meter on the Console Dashboard reads 11.6 volts or less, then the mastRcam will need to be ...