mastRcam (End of Practice) - Raise the Stabilizer Legs

mastRcam (End of Practice) - Raise the Stabilizer Legs


1. Just like when lowering the legs to secure and level the mastRcam, use the Stabilizer Camera switch to view the stabilizer legs from underneath the trailer on the Camera Monitor.
2. Use the Trailer Stabilizers switches to raise each leg. Press and hold the switches UP to raise the legs.
3. Make sure you are watching the Camera Monitor as you raise the legs. Raise the legs until they are about 5 inches from the top. DO NOT continue to raise the legs all the way to the top where it is touching the chassis as it’s possible to burn out the motor or jam the legs because the motor does not cut off when reaching resistance. 

    • Related Articles

    • mastRcam SC (End of Practice) - Raise the Stabilizer Legs

      After practice and before you get ready to move the mastRcam SC, you’ll need to make sure the stabilizer legs are raised so they don’t accidentally rip up the turf or hit curbs or large objects that will cause damage to the legs and trailer. Simply ...

    • mastRcam Operations Checklist - End of Practice

      Below is a checklist that covers all the basics of using the mastRcam at the end of practice which includes breaking down all the components, preparing the trailer for storage, and charging the mastRcam. Lower Mast Remove Camera Housings or Put on ...

    • mastRcam (Before Practice) - Raise Mast

      Now you are ready to raise the mast. Again, make sure there are no obstructions above the mastRcam that the mast could hit and that the trailer is properly secured with the stabilizer legs. To the left of the mast, there is a valve that allows you to ...

    • mastRcam SC Operations Checklist - End of Practice

      Below is a checklist that covers all the basics of using the mastRcam SC at the end of practice which includes breaking down all the components, preparing the trailer for storage, and charging the mastRcam SC. Lower Mast Remove Camera Housings or Put ...

    • mastRcam (Before Practice) - Secure and Level the mastRcam

      With the mastRcam in the spot you want it, the next step is to secure and level the trailer by lowering the stabilizer legs to the ground. 1. The first step is to make sure the wheel jack is touching the ground. 2. Next, on the Dashboard, locate the ...