mastRcam SC (During Practice) - Using the Blower

On occasion some rain droplets or debris may end up on the lens of your camera. The camera housings are equipment with an air line, so you may be able to blow the water or debris off the lens. To do this, you’ll need to move your camera to face the air line at the front of the housing and then press the Blower button on the Console Dashboard.

• Related Articles

• mastRcam (During Practice) - Using the Blower

  On occasion some rain droplets or debris may end up on the lens of your camera. The camera housings are equipment with an air line, so you may be able to blow the water or debris off the lens. To do this, you’ll need to move your camera to face the ...

• mastRcam SC Operations Checklist - End of Practice

  Below is a checklist that covers all the basics of using the mastRcam SC at the end of practice which includes breaking down all the components, preparing the trailer for storage, and charging the mastRcam SC. Lower Mast Remove Camera Housings or Put ...

• mastRcam SC (During Practice) - Using the HD-100 Tilt Controller

  On the Dashboard, you can use the HD-100 Image Processor Tilt Controller if you need to add image stabilization during windy days or rotate the image if you are unable to achieve perfect level with the mastRcam SC. The images below show what the Tilt ...

• mastRcam SC (End of Practice) - Charge mastRcam

  The batteries of the mastRcam SC can typically go two practices between charging, but there’s no harm in charging the mastRcam SC after every practice. If the volt meter on the Console Dashboard reads 11.6 volts or less, then the mastRcam SC will ...

• mastRcam SC (Before Practice) - Quick Safety Check

  With the mastRcam SC leveled and secured, the next step is to perform a quick safety check: Check for cracks in the chassis – Especially check for cracks in welds connecting the stabilizer legs and wheel jack to the aluminum chassis, as those ...