mastRcam (Before Practice) - Quick Safety Check

mastRcam (Before Practice) - Quick Safety Check

With the mastRcam leveled and secured, the next step is to perform a quick safety check:
  1. Check for cracks in the chassis – Especially check the aluminum chassis area next to the steps, as those locations obviously get a lot of foot traffic (see image below).
 
  1. Check the collars on the mast – Using your hands, attempt to twist or rotate each collar on the mast (with the mast in the down position). If they are able to move an 1/8” or greater, the mast be not be safe to use. Please call 8K Support immediately at 321-804-8211.
  2. Check for missing or loose screws & bolts – There are a lot of screws and bolts on the mastRcam, and this could pose a safety concern if any mounting screws and bolts are loose or missing. Re-tighten any loose screws and bolts, and call 8K Support if anything is missing or you have any concerns.

    • Related Articles

    • mastRcam SC (Before Practice) - Quick Safety Check

      With the mastRcam SC leveled and secured, the next step is to perform a quick safety check: Check for cracks in the chassis – Especially check for cracks in welds connecting the stabilizer legs and wheel jack to the aluminum chassis, as those ...
    • mastRcam Operations Checklist - Before Practice (1 hr before start)

      Below is a checklist that covers all the basics of setting up the mastRcam before practice. We recommend that you start this at least 1 hour before the start of practice so that if you have an issue, there will be time to resolve the issue or call us ...
    • mastRcam (Before Practice) - Systems Check / Functionality

      Before raising the mast, we want to make sure functionally all the equipment is working. 1. Turn on power – Turn the red power knob on the console dashboard to the ON position. The inverter controller should turn on immediately where the cameras, ...
    • mastRcam Operations Checklist - End of Practice

      Below is a checklist that covers all the basics of using the mastRcam at the end of practice which includes breaking down all the components, preparing the trailer for storage, and charging the mastRcam. Lower Mast Remove Camera Housings or Put on ...
    • mastRcam (Before Practice) - Install Camera Housings

      Some users will take down the cameras and housings after each practice and store them in a secure location, and others opt to just leave the cameras and housings installed. If you need to install the camera housings to the top of the mast: 1. Connect ...