mastRcam (Before Practice) - Install Guy Ropes
Some users like to use guy ropes to help keep the mast taut and minimize sway during windy days. On top of the mast, there is a metal plate with (3) guy rope holes where you can attach the ropes. When you eventually have the mast fully raised, you’ll connect and tighten the bottom part of the guy ropes to eye-bolts on the mastRcam chassis as indicated in the image below:
Important – Do NOT secure guy ropes to the chassis until AFTER the mast has been fully raised otherwise it may damage the mast.
Related Articles
mastRcam SC (Before Practice) - Install Guy Ropes
Some users like to use guy ropes to help keep the mast taut and minimize sway during windy days. On top of the mast, there is a metal plate with (3) guy rope holes where you can attach the ropes. When you eventually have the mast fully raised, you’ll ...
mastRcam Operations Checklist - Before Practice (1 hr before start)
Below is a checklist that covers all the basics of setting up the mastRcam before practice. We recommend that you start this at least 1 hour before the start of practice so that if you have an issue, there will be time to resolve the issue or call us ...
mastRcam SC Operations Checklist - Before Practice (1 hr before start)
Below is a checklist that covers all the basics of setting up the mastRcam before practice. We recommend that you start this at least 1 hour before the start of practice so that if you have an issue, there will be time to resolve the issue or call us ...
mastRcam (End of Practice) - Disconnect Guy Ropes & Close Bimini
If you attached the guy ropes to the mast for practice, you will want to disconnect them at this time. If you plan to use the guy ropes at the next practice, you can just disconnect them from the eye-bolts on the trailer and leave them connected at ...
mastRcam SC (End of Practice) - Disconnect Guy Ropes & Close Bimini
If you attached the guy ropes to the mast for practice, you will want to disconnect them at this time. If you plan to use the guy ropes at the next practice, you can just disconnect them from the eye-bolts on the trailer and leave them connected at ...