Lyvve Coach - Change Brightness
For outdoor usage, you’ll typically want to have the board’s brightness at 100%. For indoor usage, you may want to reduce brightness between 30%-60%.
To change the brightness, you’ll do this directly on the NovaStar LED processor by:
1. Press the large wheel button on the front of the NovaStar unit.
2. When the menu appears on the LCD screen, “Brightness” should already be highlighted, so press the wheel button again and then twist the button to adjust the brightness to the desired level.
Related Articles
Lyvve Coach - Training Videos
The following is a list of training videos about the Lyvve Coach: Lyvve Coach Intro https://vimeo.com/manage/videos/828463682 Lyvve Coach – NovaStar Cabinet https://vimeo.com/manage/videos/828463988 Lyvve Coach – Hydraulic & Power Distribution ...
Lyvve Coach - Powering the System
The Lyvve Coach requires, at minimum, to power on the system: (2) 20amp power circuits with 12-gauge power cords (2) 50’ power cords are provided with the Lyvve Coach OR (1) 6500 watt inverter generator A Y-splitter power cord is provided to connect ...
Lyvve Coach - Hardware Components
The following graphics show the various hardware components of the Lyvve Coach trailer: LYVVE COACH TRAILER LED BOARD The image below shows the front and back of the 12' x 7' LED board as well as a close up of an individual LED cabinet:
Lyvve Coach - Connecting 8K Replay
To connect the 8K Replay case to the Lyvve Coach’s Connection Panel, the basic flow is to have a video source (Camera, mastRcam, etc) connected to the 8K Replay case, then connect the 8K Replay Case to the Lyvve Coach. Below is a diagram showing the ...
Lyvve Coach - User Pedestal (Control Panel)
The User Control Panel (UCP or User Pedestal) is a metal box mounted on the Lyvve Coach chassis near the front of the trailer. The UCP is how the user will control most functions of the Lyvve Coach. The Rotation Pin can be pulled out to allow the ...