JVC - White Balance Picture
The simplest way to white balance your picture is to:
1. Tap the [WHITE BALANCE] button.2. Point your camera to fill up as much of the screen with something white and then press the physical USER2 button on the controller (Assuming that you have USER2 assigned as “AWB TRIGGER”). The camera will analyze the picture and determine your white balance settings automatically.
Related Articles
JVC Controller Touchscreen
1. [USER1] – The function assigned to the [USER1] button can be configured. The default function assigned is “EXPOSURE”. 2. [F1] – The function assigned to the [F1] knob can be configured. The default function assigned is “AE LEVEL”. 3. [F2] – The ...JVC - Using Presets
The JVC controller allows you to configure multiple shooting positions on one camera. This shooting position is referred to as “position”. The controller allows you to configure 10 groups by 10 patterns for a total of 100 shooting positions. To ...JVC - Configuring Pan/Tilt/Zoom
On the JVC cameras, there’s a way to adjust the speed of which the controller will pan, tilt, and zoom. 1. Tap the [LIVE] button. 2. Now use the physical F2 knob on the controller to adjust the SPEED. Values are 1-8, where 1 is the slowest speed ...JVC LP100 Controller
Front Panel 1. USER1 button – For switching the settings menu. 2. F1 knob – Used for the multi-function settings. 3. F2 knob – Used for the multi-function settings. 4. USER2 button – For switching the settings menu. 5. Zoom lever – For performing the ...JVC - Configuring Iris and Focus Settings
The Iris and Focus settings allow you to tweak brightness settings: 1. For changing gain, shutter, and iris settings, tap the [EXPOSURE] button. 2. If you have [USER1] currently assigned as “Exposure”, press the physical USER1 button on the ...