JVC - Using Presets

JVC - Using Presets

The JVC controller allows you to configure multiple shooting positions on one camera. This shooting position is referred to as “position”. The controller allows you to configure 10 groups by 10 patterns for a total of 100 shooting positions.

To select a preset position:
1. Select the Position Group tab and tap a group number.
2. Select the Position tab and tap a preset number. This will move the camera to the preset shooting position assigned for that preset.
To create or store a preset:
1. First point your camera to the shooting position to want to save as a preset.
2. Tap the [STORE] button on the controller.
3. Tap the Position Group tab and select a group number.
4. Tap the Position tab.
5. Select the number you want to assign the current camera position to and tap the [ENTER] button. You now have stored the preset.
To delete a preset:
1. Tap the [DELETE] button on the controller.
2. Tap the Position Group tab and select a group number.
3. Tap the Position tab.
4. Select the position number to be deleted and tap the [ENTER] button. The preset is now deleted.

    • Related Articles

    • JVC Controller Touchscreen

      1. [USER1] – The function assigned to the [USER1] button can be configured. The default function assigned is “EXPOSURE”. 2. [F1] – The function assigned to the [F1] knob can be configured. The default function assigned is “AE LEVEL”. 3. [F2] – The ...

    • JVC - Configuring Pan/Tilt/Zoom

      On the JVC cameras, there’s a way to adjust the speed of which the controller will pan, tilt, and zoom. 1. Tap the [LIVE] button.   2. Now use the physical F2 knob on the controller to adjust the SPEED. Values are 1-8, where 1 is the slowest speed ...

    • RP-150 Controller - Using Presets

      To store Presets from your RP-150 Controller: 1) Press the PMEM/TMEM button on the controller 2) On the touchscreen, you'll see a list of preset buttons. To store a preset, first set your camera to a view that you want to save as a preset (For ...

    • JVC LP100 Controller

      Front Panel 1. USER1 button – For switching the settings menu. 2. F1 knob – Used for the multi-function settings. 3. F2 knob – Used for the multi-function settings. 4. USER2 button – For switching the settings menu. 5. Zoom lever – For performing the ...

    • JVC - White Balance Picture

      The simplest way to white balance your picture is to: 1. Tap the [WHITE BALANCE] button.   2. Point your camera to fill up as much of the screen with something white and then press the physical USER2 button on the controller (Assuming that you have ...