JVC Controller Touchscreen

JVC Controller Touchscreen


1. [USER1] – The function assigned to the [USER1] button can be configured. The default function assigned is “EXPOSURE”.
2. [F1] – The function assigned to the [F1] knob can be configured. The default function assigned is “AE LEVEL”.
3. [F2] – The function assigned to the [F2] knob can be configured. The default function assigned is “SPEED”.
4. [F3] – The function assigned to the [F3] lever can be configured. The default function assigned is “NONE”.
5. [USER2] – The function assigned to the [USER2] button can be configured. The default function assigned is “FOCUS”.
6. [LIVE] – Tap the button to activate the presets for LIVE. F1 = AE LEVEL, F2 = SPEED, F3 = NONE, USER1 = FOCUS, USER2 = REC
7. [EXPOSURE] – Tap the button to activate the presets for EXPOSURE. F1 = GAIN, F2 = SHUTTER, F3 = IRIS, USER1 = EXPOSURE, USER2 = STREAMING
8. [WHITE BALANCE] – Tap the button to activate the presets for WHITE BALANCE. F1 = WB R, F2 = WB B, F3 = NONE, USER1 = WB, USER2 = AWB TRIGGER
9. [SETTINGS] – Tap the button to display the SETTINGS screen.
10. [ENTER] – Appears when unit goes into [STORE] mode or [DELETE] mode. Can be used to confirm and delete the position number.
11. [VIEW] – Tap the button to enter [VIEW] mode.
12. [STORE] – Tap the button to enter [STORE] mode.
13. [DELETE] – Tap the button to enter [DELETE] mode.
14. [PT ACTIVE] – Tap the button to switch [PT ACTIVE] on and off. Switching to OFF disables the pan/tilt operation by the control lever.
15. [Position Group] – Displays the number of the position group currently selected.
16. [CAM Group] – Displays the number of the camera group currently selected.
17. [Position Group] – Tap to switch to the selection of position group number.
18. [CAM Group] – Tap to switch to the selection of camera group number.
19. [Position] – Tap to switch to the selection of position number.
20. Position / Position Group / CAM Group number buttons – Allows you to select the position / position group / camera group number.
21. Camera number button – Allows you to select the camera number.


    • Related Articles

    • JVC - Using Presets

      The JVC controller allows you to configure multiple shooting positions on one camera. This shooting position is referred to as “position”. The controller allows you to configure 10 groups by 10 patterns for a total of 100 shooting positions. To ...

    • JVC - Configuring Pan/Tilt/Zoom

      On the JVC cameras, there’s a way to adjust the speed of which the controller will pan, tilt, and zoom. 1. Tap the [LIVE] button.   2. Now use the physical F2 knob on the controller to adjust the SPEED. Values are 1-8, where 1 is the slowest speed ...

    • JVC LP100 Controller

      Front Panel 1. USER1 button – For switching the settings menu. 2. F1 knob – Used for the multi-function settings. 3. F2 knob – Used for the multi-function settings. 4. USER2 button – For switching the settings menu. 5. Zoom lever – For performing the ...

    • JVC - White Balance Picture

      The simplest way to white balance your picture is to: 1. Tap the [WHITE BALANCE] button.   2. Point your camera to fill up as much of the screen with something white and then press the physical USER2 button on the controller (Assuming that you have ...

    • JVC - Configuring Iris and Focus Settings

      The Iris and Focus settings allow you to tweak brightness settings: 1. For changing gain, shutter, and iris settings, tap the [EXPOSURE] button.   2. If you have [USER1] currently assigned as “Exposure”, press the physical USER1 button on the ...