Customize Camera Labels on Decimator Multiviewer

Customize Camera Labels on Decimator Multiviewer

Download the latest Decimator Control Panel software at https://decimator.com/DOWNLOADS/DOWNLOADS.html

  1. Once you've connected to your Decimator multiviewer (via USB A --> USB B mini) within the Control Panel software, click on the UMDs tab.
  2. In this menu, you can change the text/label of each of the sources

    • Related Articles

    • Customize Camera Labels in Blackmagic MultiView

      Download Multiview software here: https://www.blackmagicdesign.com/support/family/multiview-monitoring CUSTOMIZING INPUT LABELS Labeling your sources lets you quickly identify each source within the multi view layout. You can also save and load label ...

    • RP-120 Controller - Unable to control camera

      1) First power cycle both the camera and controller 2) If that doesn't fix the issue, press button 36 CTRL TYPE and make sure CAM 1 is set to "Serial" 3) Also make sure that the 422 cable connecting into the controller is in Port 1 (But not the LAN ...

    • UE-150 Camera - Fixing "Sluggish" Camera Control

      ** AS OF DECEMBER 2020 - There is new firmware from Panasonic that fixes this issue. The steps below can be considered a temp fix until firmware can be updated 1. From your 150 Controller, press the MAINTENANCE button located on the right side of the ...

    • mastRcam SC (Before Practice) - Install Camera Housings

      Some users will take down the cameras and housings after each practice and store them in a secure location, and others opt to just leave the cameras and housings installed. If you need to install the camera housings to the top of the mast: 1. Connect ...

    • mastRcam (Before Practice) - Install Camera Housings

      Some users will take down the cameras and housings after each practice and store them in a secure location, and others opt to just leave the cameras and housings installed. If you need to install the camera housings to the top of the mast: 1. Connect ...