HR-130 Camera - Losing focus when zooming in/out
If a camera is losing focus when zooming in or out:
1) Verify that the Auto Focus button is lit.
2) Verify that Auto Iris is also lit.
3) Power cycle the camera.
Related Articles
Camera Focus Issues When Shooting Through a Net
For endzone cameras that may need to shoot video through the net, the camera's auto focus feature may focus on the netting instead of the players. To fix this, you have to turn off "Focus ADJ With PTZ":
RP-120 Controller - Unable to control camera
1) First power cycle both the camera and controller 2) If that doesn't fix the issue, press button 36 CTRL TYPE and make sure CAM 1 is set to "Serial" 3) Also make sure that the 422 cable connecting into the controller is in Port 1 (But not the LAN ...
JVC - Configuring Iris and Focus Settings
The Iris and Focus settings allow you to tweak brightness settings: 1. For changing gain, shutter, and iris settings, tap the [EXPOSURE] button. 2. If you have [USER1] currently assigned as “Exposure”, press the physical USER1 button on the ...
8K Replay - Losing Frames or Artifacted Video
This is an issue that may be more common with multi-stream Replay systems, but if a customer has a single-stream system but has multiple camera feeds going to a video switcher and then to Replay, this issue could pop up. The primary issue is that 8K ...
HR-140 Heater and Defroster Setup on RP-150 Controller
The outdoor Panasonic HR-140 cameras contain a heater and defroster feature that can be activated from the RP-150 controller. But you'll need to configure a User button for these features: Select function menu, button to the right of the touchscreen: ...