Atomos - Pixelated Video

Atomos - Pixelated Video

If you are seeing pixelated video from recorded clips (Not live), there are a couple of settings to adjust that should resolve this:

  1. From the Atomos, tap on the "H.264 HQ" menu item on top of the screen. This should bring up a pop up menu.
  2. On the "Record" tab, change the Compression option from JVC GOP to STANDARD GOP.
  3. Go to the "WiFi" tab and turn WiFi OFF


    • Related Articles

    • Atomos - How to configure the Atomos recorder

      When setting up a new Atomos, here are the settings that the recorder needs to be configured: On the top of the Atomos screen, tap on the "H.264 HQ" item. This will bring up a large pop up menu where all the settings live. You should be on the ...

    • Atomos - How to Format the SSD Drive

      Before the Atomos can record onto a new SSD drive, it needs to be formatted. 1) Plug the drive into the back of the Atomos 2) Tap on the touchscreen to bring up the top info bar, or click SETTINGS 3) Tap MEDIA 4) Tap FORMAT

    • Invalid SDI Video or No Video Source (HD-100)

      Typically if video is lost on the mastRcam camera system there are 2 types of errors you'll see on the monitor or UMR-20: NO VIDEO SOURCE AVAILABLE This error is typically a problem with the camera's signal and not the HD-100. You'll notice on the ...

    • Invalid SDI Video or No Video Source (HD-100)

      Typically if video is lost on the mastRcam camera system there are 2 types of errors you'll see on the monitor or UMR-20: NO VIDEO SOURCE AVAILABLE This error is typically a problem with the camera's signal and not the HD-100. You'll notice on the ...

    • Replay (Teradek) - Change Video Output Bit Rate

      Close all open Chrome windows. Press the "Windows Key" and the taskbar will come up. Right click on the Chrome windows to close. If two Chrome windows are open you will need to repeat this step for the second window. Press the "Windows Key" and ...